:
SA & SB
(:) Suction strainers,
SA series with bypass option available,
SB series with magnet assembly.
(:) Ports sizes from 3/8" to 4" in BSP and NPT.
(:) Nominal flow rates to 600 L/min.
(:) Standard wire mesh: ME, MF, MG.

PDF - SA & SB

:
SC
(:) Tank side wall mounting.
(:) Ports sizes from 1 1/4" to 4" in BSP, NPT and Flange.
(:) Nominal flow rates to 500 L/min.
(:) Standard wire mesh: ME, MF, MG.

PDF - SC

:
SD
(:) Multiple mounting, tank-top or in line with double inlet option.
(:) Ports sizes from 1/2" to 3 1/2" in BSP, NPT, SAE and Flange.
(:) Nominal flow rates to 480 L/min.
(:) Standard wire mesh: ME, MF, MG.

PDF - SD
:
SE & SF
(:) Spin-on filters.
(:) Ports sizes from 3/4" to 1 1/2" in BSP, NPT, SAE and Flange.
(:) Nominal flow rates to 75 L/min.
(:) Standard filter media: CC, CD, ME, MF.

PDF - SE
 PDF - SF
-
FILTRATION IN BRIEF
(:) Contamination control in hydraulic systems (:)

Please visit our "Products" section > Filtration Handbook
or download the following PDF


filtration in brief.pdf

We have named PUMP CARE the Suction Filters because thanks to their function of protection from coarse contamination (due to lack of initiai cleaning or to an accidental ingression) they take care of the pump, ensuring a safe and efficient operation. The Suction Filters must be always properly sized to avoid cavitation of the pump: the values given in the sizing instructions and the flow rates indicated in the Quick Selection Chart consider a wide safety factor.
A clogging indicator is recommended, signalling in time the need for filter element replacement, and the bypass valve option is also available. Obviously the function of the Suction Filters is only the protection of the pump; the generai cleanliness level required by the system must be ensured by the filters having that function (Return or Pressure fiIters).